5/31/09
a strong inert Only fully activated
First post by: www.itsbattery.com
Compared with other IBM FRU 92P1137 Batterysecondary batteries, lithium-ion batteries have excellent properties, are widely used in mobile phone, laptop and other electronic products. In the use of the process needs to pay attention to what matters, which may be U.S. are most concerned about. To this end, we come and listen to the views of experts and manufacturers.
dell Notebook battery conservation strategy
Use a lot of people have been accustomed to flying laptop external power supply, but this usage the battery will cause damage, or even unavailable. The reason is connected to AC power laptop battery will be automatically after the charge, which is equivalent to a day in fact part of the battery charge and IBM 02K6651 Batterydischarge, thereby affecting the battery life. So frequently used the power of working hours, please remove thedell 1691P battery , dell 75UYF battery, dell 8N544 battery.
If long-term use of external power supply, the use of one week (up to 1 month) should conduct a full charge and discharge, it can fix the dell Inspiron 9300 battery control system (register) in the improper value, but also enables control and charging a nominal capacity in line are in fact come through the full charge and discharge the battery calibration chips. This operation removed the battery for the best.
Founder Technology Mobile Product Development Engineer Product Cao Ping said that many times after the release rechargeable dell Inspiron 6000 battery capacity will be lowered, the extent of the decline in battery capacity and charge-discharge is directly proportional to IBM 02K6928 Batterythe number.
Newly manufactured lithium-ion dell Inspiron 700m battery rechargeable only give about 50% of capacity, the new apple laptop battery is also true. When first-time release will do more than electricity, and then an external power supply is full of electricity, but also the best first charge over 15 hours. Secondly, we have to wait three rechargeable battery is used up, the charging time to more than 12 hours.
A lot of manufacturers of products apple M6091 battery apple A1012 battery , such as Founder's laptop power supply circuit and the itself, are designed to charge and discharge control and protection circuitry, battery power will be monitored through the monitoring system, power consumption is lower than when the machine settings will be issued warnings, this time on the can charge the battery.
Cao Ping said that the long-term non-use of apple M8511 battery in storage IBM 02K6620 Batterybefore the first battery charge or discharge to about 40%, then on 15 to 25 degrees Celsius dry place preservation, interval 3 months, it is necessary to check the battery out to prevent battery over-discharge damage. In addition, under normal circumstances the battery is full, the system will automatically cut off the charging circuit, charging indicator light machine out by the light switch. Such as over-charging the battery, the apple A1078 battery temperature will rise, so that excess energy, the internal electrolyte decomposition gases, causing the battery internal pressure arising from increased risk of spontaneous combustion or broken. Founder Technology has been so remind clients, toshiba laptop battery must be recharged on the original machine to prohibit the use of third-party charger or on other models of laptop on the charger, in order to avoid unnecessary risk.
Notebook toshiba PA2487UR adhere to the same direction of development is still IBM 02K7039 Battery environmentally friendly, safe, light weight and the same volume of electricity higher storage space. On the current development trend, the toshiba PA3383U-1BRS battery is still the main application of lithium-ion battery; fuel cells are most likely to replace the current lithium-ion battery, but the current development situation, may also be required several years of effort; and solar cells the relative safety of the most environmentally friendly, but because its output voltage and power is too small applications such as notebooks have to wait until the next technological breakthroughs that can widely used.
Samsung notebook express the responsible person: the impact of lithium toshiba PA3107U-1BRS battery life of the main factors are the number of charging and discharging. So if the frequent use of batteries, battery life will drop faster. In day-to-day use, it must IBM ThinkPad X60 Batterybe noted that batteries do not have the best time to be removed, while minimizing the number of battery charge and discharge in order to ensure that the battery's long-term, effective use. High current rechargeable batteries do not exceed the rated voltage, the impact is very small. Samsung quick charging technology notebook battery power in the permit as far as increasing voltage, charging time so short, compared to other brands of computer charging time advantage is obvious. Depth of discharge generally do not use the battery in a long time to use better, otherwise the depth of the frequent discharge will affect the battery life. If short-term need to maintain 50% of electricity consumption better.
Although lithium-ion presario 2500 battery memory effect was not obvious, but still run out of electricity after the proposed charge, the battery is full of electricity after the laptop has a general detection circuit will automatically stop charging, so in general have little effect. It should be noted that when used it is better not to frequent charging and discharging batteries, a run out, a full battery to use the lower frequency, longer life expectancy. The future development direction of the main battery is a high-shaped, high-capacity, portable.IBM FRU 92P1167 Battery is also developing a variety of new concepts of battery products, particularly fuel cells are developing very fast, I hope the near future be able to apply to the Samsung laptop, in order to provide users with better and more convenient experience.
The use of mobile phone batteries
Lithium-ionibm ThinkPad T60 battery the chemical properties of lively, intense reaction, therefore, for daily use to prevent rain, snow, sweat, such as liquid immersion, once falling into the water to immediately shutdown maintenance, otherwise they will cause combustion. These are questions which must be strictly cell phone users attention. Similar to a lot of attention, in order to secure the proper use of cell phone batteries, but also note the following:
• Do not use a damaged ibm ThinkPad R40 battery , not to random cell phone demolition and conversion.
• Thunderstorm days to avoid the use of cell phone outdoors.
• Single call to minimize the time, notIBM ThinkPad Z60t Battery tate-of-charge call, multi-use headset to answer the call.
• Cell phone should not be hung on the chest, as far as possible on the mobile phone bag.
No need to deliberately ensure that every time a re-release END electric charge, but the use of a period of time, the best to do a complete ibm ThinkPad T40 battery charge and discharge to detect the battery control circuitry and battery power to amend the Census and Statistics. Related products Sony Ericsson said that in order to put the best cell phone battery to adjust working state, the first charge to completely full is very important, because lithium-ion battery Although there is no memory effect, but it has a strong inert Only fully activated in order to achieve the best condition. Secondly, the use of cell phone batteries, the batteries should not be directly exposed to extremely high or extremely low temperature environment, the ambient IBM ThinkPad Z61t Battery temperature is best not more than 60 degrees, this way we can ensure that the battery, stable and sustainable work. Finally, we must pay attention to battery when the use of Sony Ericsson branded original batteries and chargers, and as far as possible in 5 ~ 45 degrees Celsius temperatures to charge the battery. By taking these initiatives, we can effectively improve the utilization efficiency of the sony VGP-BPS3 battery , the battery to adjust the best working condition.
Battery life from the perspective of consumers, electricity consumption less than 10% after the charge is the best, which is conducive to extend the battery life.
Save time when cell phone battery, it is necessary to note the following:
1. Can not the battery placed in liquid or exposed to high humidity environment.
2. Do not expose the battery in extremely high orIBM 40Y6793 Battery extremely low temperature environment.
3. Can not throw or bending cell phone battery.
4. Do not try demolition of mobile phone batteries.
Analysis of commonly used rechargeable batteries
According to the electrode structure and manufacturing process is different from Ni-Cdsony PCGA-BP2V battery into the battery box has plate, sintered-type batteries, sealed batteries, foam-type battery, batteries and plastic fiber-type battery, such as bonding. The most commonly used in sealed Ni-Cd battery is divided into cylindrical and flat (button) batteries, as well as rectangular and oval-shaped and so on. Cylindrical battery capacity of 0.07 ~ 10Ah, button battery capacity is IBM FRU 92P1125 Batterygenerally 0.02 ~ 0.50Ah.
Nickel metal hydride battery
Nickel metal hydride sony PCGA-BP2NY battery using hydrogen storage alloy as negative electrode, Ni (OH) 2 for the cathode, KOH as the electrolyte solution, this battery is also referred to as Ni-MH battery. Ni-MH battery with the working principle is similar to nickel-cadmium batteries, electrolyte solution and the cathode material is the same as the anode material for metal hydride in place of cadmium only.
Lead-acid batteries
Lead-acid battery is a typical secondary chemical power, reversible electrode reaction, the entire battery system reversible; electrolyte solution is IBM FRU 92P1121 Batterysimple, only using a electrolyte, electrolyte solution does not exist between the diffusion effects; product insoluble,pb994a , pb991a discharge, the two electrode active substances are converted into insoluble sulphate of lead, lead sulfate electrode surface to avoid charging during the generation of dendrites, such as premature.
Lead-acid battery positive electrode active material is lead dioxide, anode active material is a sponge-like metal lead, for the sulfuric acid electrolyte solution.
According to requirements of different uses can be monomer sony PCGA-BP2S battery in series, parallel and series-parallel combination to form the IBM Laptop Battery pack.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment